Single Speed Electric Blower - SVB-E8

18"W x 19"H x 19"D

• GFI Power Cord
• 3/4 HP electric motor, 115 VAC, 11.2 amp
• 1570 cfm free air delivery
• 8" intake and exhaust flange
• Aluminum non-sparking 
  blower wheel
• Powder coat steel frame         
• Steel safety guards
• Weight: 53 lbs.

2-Speed Electric Blower w/ GFI - SVB-E8-2

 20"W x 19"H x 19"D

• GFI Power Cord
• 3/4 HP electric motor, 115 VAC, 11.5 amp
• 750 low/1570 high cfm free air delivery
• 8" intake and exhaust 
  flange                            
• Aluminum non-sparking 
  blower wheel
• Powder coat steel frame    
• Steel safety guards
• Weight: 64 lbs.

Gasoline Powered Blower - SVB-G8

20"W x 20"H x 20"D

• BRIGGS & STATTON ENGINE
• 5 ft. remote flexible steel exhaust hose w/ custom gas tight muffler to prevent intake of CO exhaust
• 3.5 HP Briggs & Stratton  motor           
• 8" intake and exhaust    
  flange                                   
• 3000cfm max free air Meets CALOSHA emissions
  delivery
• Four independent rubber engine vibration mounts         
• Steel safety guards
• Weight: 47 lbs.
• HONDA ENGINE 4 HP  Order Model SVB-G8-H PROPANE ENGINE - B & S motor  Order Model SVB-G8-P

Explosion-Proof Electric Blower - SVB-E8EXP

23"W x 20"H x 19"D

• 3/4 HP UL listed electric motor, 115 VAC, 12.6 amp
• Explosion-proof switch installed and wired
• 8" intake and exhaust flange
• Pre-Wired w/ 25ft Cord.  No Plug.
• Approved for Class 1, Div. I,
• Groups C and D, Class II, Div. 1, Groups E, F, G
• Aluminum non-sparking 
  blower wheel
• Static grounding lug installed            
• Steel safety guards
• Weight: 79 lbs.

Pneumatic Air Powered Blower - SVB-A8

Intrinsically Safe

21"W x 19"H x 19"D

• Ultra-quiet operation - under 80 dbA
• Runs off any compressed air  source            
• Ideal for hazardous locations 
• Adjustable flow output regulator
• In-line moisture separator/lubricator provided
• 3000cfm free air delivery at max psi and cfm
• Unique muffler and oil coalescing filter installed at air motor discharge          
• 8" intake and exhaust flange
• Aluminum non-sparking blower wheel
• Static grounding lug installed
• Steel safety guards
• Weight:  50 lbs.

Economy Electric Blower - SVB-E8EC

17"W x 18"H x 18"D

• 1/2 HP electric motor, 7.9 amps, 60 Hz, 115 VAC
• Steel safety guards
• GFI power cord
• 8" intake and exhaust and optional 8" inlet flange
• 1390 cfm free air delivery
• Powder coat steel frame
• Steel safety guards
• Weight: 37 lbs.

Venturi Blower Features

• Used to ventilate explosive and hazardous vapors or fumes safely
• No moving parts
• Lightweight cast aluminum base
• Static grounding lug is standard
• Operates on compressed air or steam
• Galvanized steel horn (replaceable)
• Operating pressures up to 140psi
• Large models available up to 8000 cfm capacity - consult factory

ASI-1000     ASI-1200       ASI-2900           ASI-4100